TC-
CARBON
-OP-EN
- 33 -
80 Grit Sand Paper
N/A
N/A
100 Grit Sand Paper
N/A
N/A
400 Grit Diamond Polishing Pad
N/A
EDGE-4013
800 Grit Diamond Polishing Pad
N/A
EDGE-4014
1500 Grit Diamond Polishing Pad
N/A
EDGE-4015
3000 Grit Diamond Polishing Pad
N/A
EDGE-4016
6000 Grit Diamond Polishing Pad
N/A
EDGE-4070
Tile/Grout Renovator Pad
N/A
EDGE-4048
Dominator HD Strip Pad
N/A
EDGE-4055
Maroon ECO Prep Pad
EDGE-2407
EDGE-4056
SQUEEGEE BLADE KITS & COMPLETE SQUEEGEE ASSEMBLIES:
SQUEEGEE
SIZE
26'' DISK
DECKS
2
8
'' DISK
DECKS
25'' CYL.
DECKS
29'' CYL.
DECKS
24'' EDGE
DECKS
2
8
'' EDGE
DECKS
36'' Squeegee
Standard
Standard
Standard
Standard
Standard
Standard
42'' Squeegee
Optional
Optional
Optional
Optional
Optional
Optional
SQUEEGEE
SIZE
LINATEX BLADE
KIT
GUM RUBBER
BLADE KIT
URETHANE
BLADE KIT
COMPLETE
SQUEEGEE
ASSEMBLIES
36'' Squeegee
36-770L
36-770G
36-770U
36-7180
42'' Squeegee
42-770L
42-770G
42-770U
42-7180
SQUEEGEE MATERIAL:
USED FOR:
LINATEX
Provides best wear and tear resistance. Not
designed for use with harsh chemicals.
URETHANE
Provides best resistance when dealing with harsh
chemicals, oils, fuels, etc.
GUM
Provides best drying preformance on rough/grouted
fl oor types by sealing over irregularities. Short life.
NOTICE
Squeegee blade kits include (1) Rear Blade, (1) Front
Blade, and (2) Caster Wheels with hardware.
NOTICE
Squeegee Assemblies (complete) listed above all come
with Linatex blades.
NOTICE
Size is stamped into the top of the painted steel
squeegee body on all squeegee's.
q
g
y
q
g
Summary of Contents for CARBON 24'' EDGE
