IS0802-00
11-08-18
EXPLOSION HAZARD—To reduce the risk of fire or explosion, do not install the beacon in a hazardous
location if the operating temperature exceeds the hazardous atmosphere’s ignition temperature. Before
proceeding, consult the product nameplate and determine the operating temperature of the beacon.
OPERATION
To operate the unit, apply power after any changes to flash rate settings (tables above).
SERVICE AND REPAIR
DANGER HIGH VOLTAGE
Should the light fail to operate, check to see that the proper voltage is reaching the unit. If the unit still fails to
operate, replace the light engine.
To replace a lens or light engine, switch power off and wait 5 minutes before removing lens.
WARNING - EXPLOSION HAZARD - SUBSTITUTION OF COMPONENTS MAY IMPAIR SUITABILITY
FOR CLASS I, DIVISION 2.
WARNING - EXPLOSION HAZARD - DO NOT DISCONNECT EQUIPMENT UNLESS POWER HAS BEEN
SWITCHED OFF OR THE AREA IS KNOWN TO BE NON - HAZARDOUS.
TOMAR Electronics, Inc.
2100 West Obispo • Gilbert, Arizona 85233 USA
800-338-3133 • (480) 497-4400 • FAX (480) 497-4416
www.tomar.com