16
ENGLISH
INSTALLATION AND TUNING PROCESS
Insert both parts of the wing onto the wing connector and connect the plugs of the wing servos.
Use M4 Allen socket screws to connect the wing with the fuselage.
17
Make sure that no wires are stuck between the fuselage and the wing.
18
Turn your transmitter and receiver on. Make sure that the correct model is adjusted on the me
-
mory of your transmitter. If possible, try to adjust all rods mechanically.
20
The next step is to check the running direction and ways of the servos. Therefore please note the
grid below.
21
CENTER OF GRAVITY
The center of gravity is set at 78-83mm behind the leading edge. It is recommended that beginners
set the center of gravity at 78mm. More experienced users can set it further to the back, in order to
achieve a more dynamic flight envelope.
CONTROL THROWS
Normal
Speed
Thermal
Landing
Ailerons
▲
12 mm
▼
6 mm
▲
1 mm
▼
2 mm
Elevator
▲
10 mm
▼
10 mm
Rudder
◄
15 mm
►
15 mm
Flaps
▲
2 mm
▼
3 mm
▼
20 mm
