Description
Possible cause
What to do?
Abnormal noise
The transport bolts are still in place.
The floor is not solid or level
Check if the transport bolts have
been removed.
Make sure the appliance is installed on
a solid and level floor.
ERROR CODE TABLE
Description
Possible cause
What to do?
Water injecting problem during the wash cycle Check if the water pressure is high enough.
Straighten the water supply hose.
Clean the inlet filter.
Water overflow
Restart the appliance.
Overtime water draining
Check the water discharge hose for blockage.
The door is not closed properly
Close the door properly and restart.
Others
Restart the appliance. If the problem persists,
please contact the customer service.
• CUSTOMER SERVICE
Spare parts for your appliance are available for a minimum of 10 years.
In case of questions, please contact the customer service.
WARNING!
Risk of electric shock
• Never try to repair an appliance which is defective or presumed to be defective. You may put your own and future users’
lives in danger. Only authorised specialists are allowed to carry out this repair work.
• Improper repair will void the warranty and subsequent damages can’t be recognized!
TRANSPORT
IMPORTANT STEPS WHEN MOVING THE APPLIANCE
• Unplug the appliance and close the water tap.
• Check, if the door and the dispenser tray are closed properly.
• Remove the water supply hose and the water discharge hose from the house installations.
• Let the water drain completely from the appliance.
•
IMPORTANT:
Re-install the 4 transport bolts in the back of the appliance.
• The appliance is heavy. Transport with care. Never hold any protruding part of the appliance when lifting.
The door of the appliance cannot be used as a handle.
• TECHNICAL SPECIFICATIONS
Model
TWM8001W
Washing capacity
8.0 kg
Power supply
220-240V~, 50Hz
Rated power
2000 W
MAX. current
10A
Standard water pressure
0.05 MPa - 1 MPa
Dimension (WxDxH in mm)
595 x 565 x 850
Nett weight
68 kg
595
565
850
EN - 50
Summary of Contents for TWM8001W
Page 103: ...103 ...
