TOM-Audio TG-200 eTour, User Manual

Page: 48 / 58

48
User Manual - TOM-Audio TG-200
48
5. Use the increase and decrease buttons ( / ) to adjust the channel.
Remark: You can find suggestions about the right choice of radio channels in
chapter eight in this user manual.
6. Confirm your choice by pushing the confirmation button ( ). Alternitavely
the device will save and lock the radio channel automatically after five seconds.
7. The radio channel symbol ( ) will stop flashing and the key symbol ( ) will
reappear on the display.
8. The receivers now automatically change their channel to the transmitter‘s
channel.
9. The transmitter and receivers now form a group.
4.10. Synchronization using the Sync Kit SK-200
The Sync Kit SK-100 is available as an optional accessory which helps you to synchronize
large number of devices. It only works the second generation of the charging and trans-
portation bag, which was shipped from August 2014.
1. Please put the devices you want to synchronize in the charging cradle.
2. Connect the transportation and charging bag with a power outlet.
3. Turn on the Sync Kit SK-200 by pushing the On button ( ) for approx. three
seconds.
4. Use the increase and decrease button to choose your desired radio channel.
5. Now put the Sync Kit in one of the charging cradles.
6. The charging cradle‘s LEDs will flash five times. All devices are now synchronized
Remark
: There must not be two Sync Kit SK-200 in the charging cradle of the
transportation and charging bag while synchronization.