TOM-Audio TG-200 eTour, User Manual

Page: 46 / 58

46
User Manual - TOM-Audio TG-200
46
to the left to select the audible volume of the AF L (I) channel, and turn it to the
right to select the AF R (II) channel.
4.8.4. Connect the headphone
1. To avoid permanently damaging your ears with extremely loud volume, turn the
volume knob of the headphone to fully counter-clockwise (the minimum sound
level) before wearing your headphone.
2. Connect the headphone with 3.5 mm jack and monitor the contents.
3. Wear the headphone and gradually turn up to reach your desired volume.
Step 1 Step 2 Step 3
4.8.5. Connect audio input sources
1. Connect audio sources to Left (input I) or Right (input II) input jacks on the rear
panel.
2. Adjust to the proper input sensitivity level (Line or Aux level).
3. Turn the AF VOL knob to the desired audio level.
4. Make sure the AF balance cursor is positioned at the center or shift to the
L (I)/R(II) channel according to where input source is connected.