29
User Manual - TOM-Audio TG-101
29
7. The system is now ready to use.
4. Handling TG-101
4.1. Turning the devices On / Off
Please push the transmitter‘s (
) resp. receiver‘s (
) On/Off button for approx.
three seconds to turn it on. The serviceability is indicated by the activated display.
To turn off the devices please push the transmitter‘s (
) resp. receiver‘s (
) On/Off
button for approx. three seconds. The device is turned off when the display is deactiva-
ted.
Remark
: The receivers turn off automatically of it does not receive any signals for
approx. 20 min.
4.2. Connecting the headset to the transmitter
Please connect the supplied microphone with the transmitter‘s microphone jack (No. 8).
Remark:
A flashing, canceled out loudspeaker symbol ( ) indicates that there is no
microphone connected or the microphone is not connected properly.
4.3. Connecting a playback device to the transmitter
The transmitter‘s 3,5 mm microphone jack (No. 8) doubles as an input jack for playback
devices (e.g. MP3-Player, smartphone, laptop)
Based on the plug you use the transmitter automatically recognizes the connected
device. The microphone will be recognized by a 3,5 mm mono plug. A playback device
will be recognized by a 3,5 mm stereo plug. If the transmitter recognizes a microphone,
the volume will be display as usual. If the transmitter recognizes a playback device, the
volume level will flash and only show one bar (
).
In this case the volume must be controlled from the playback device. By pushing the
transmitter‘s mute button (
) the music will be muted. By pushing the mute button
again the muting will be reversed.
Remark
: Always use a stereo plug to connect a playback device to the transmitter.