TOLSEN TOOLS Force Xpress 79575, Instruction Manual

Page: 3 / 16

3 SAFETY
23. WARNING: Inadequate extension cables may be dangerous. Cables and spools must always be completely unwound to
avoid letting the cable overheat.
24. If an extension cable is used, the plug and socket must be waterproof and conform to the requirements below regarding the
length and dimensions of the cable.
1,0 mm ² max. 12,5 m 1,5mm²max.20 m
25. If the power cable is damaged, it must be replaced by the manufacturer, their service agent or a qualified professional in
order to avoid any danger.
26. WARNING: This machine is not designed to be used by persons (including children) with reduced physical, sensory or mental
capacities or whose lack experience or knowledge.
27. WARNING: It is advisable that you supervise children to ensure that they do not play with the appliance.
28. CAUTION – Risk of explosion – do not spray flammable liquids, do not direct the jet towards flammable liquids.
29. WARNING: Water that has circulated in the anti-back flow system is not considered drinkable.
30. WARNING: Do not use the appliance if the power cable or important parts of the appliance are damaged, for example, the
safety devices, high pressure hoses and handgun.
31. WARNING: If you have an extension cable, it must be waterproof.
32. WARNING: When you switch on the machine, a recoil movement is produced due to the force of the water jet. Use two hands
to control the lance. Wear safety gloves when using the appliance. Wear suitable protective clothing.
33. In case of accidental contact with detergent, wash with water. If the liquid comes into contact with the eyes, also seek medical
assistance (the detergent can cause irritations or burns).
35. In the event that the appliance breaks down, do not attempt to repair it yourself but contact a professional technician to avoid
any danger.
Main power connection
The following must be observed when connecting the high pressure washer to the power supply:
36. Connecting the electrical connection should be done by a qualified electrician conforming to 60364-1 CEI
37. It is recommended that the electrical supply to this machine should comprise a residual current device which interrupts the
current if the leakage current exceeds 30 mA for 30ms.
CONNECTING TO THE WATER NETWORK WARNING
According to current guidelines, the unit must never be operated without a system separator on the potable water system. Use
a EN 12729 type BA system separator. Water that passes through a system separator is classified as non-potable.
WARNING: Always connect the system separator to the water supply and never directly to the device!