13
(6)Partial-scan mode selection (Camera rear-panel DIP SW)
Switches partial-scan mode
Note: Sometimes phenomenon called as “whiteout” occurs at the top of the screen when
there is strong incident light entering in the wide area of a CCD, however, this is not a
malfunction. If this occurs, reduce the amount of incoming rays.
(6-1)1/2 Partial-scan (Rear-panel SW: 7-OFF, 8-ON) --- Screen center 1/2 readout
(1/60s Non-interlace)
Under 1/60s non-interlace mode, only the center portion of 220H out of the total
effective lines 492H (excluding BLK time) is read out. Available both under external /
internal mode.
Under normal shutter (Electronic shutter OFF)
Notes: * Under ex-sync, the external VD should be 1V = 262H.
** Under normal shutter, set the rear-panel DIP SW #5, #6 in OFF.
139H
133H
High-speed
transfer
Normal-sp
eed
transfer
High-speed
transfer
220H
220H
Normal-sp
eed
transfer
28H
220H
VIDEO OUT
Video output
time
V BLK
(Inc.H-speed)
1
4H
1
4
1
High
speed
360
1
4
1
360
262H
262H
WEN OUT
(Negative)
9H
9H
9H
V-reset
