Tokyo Electronic CS4000 SERIES, Operation Manual, Page: 8 / 23

③
[DC IN / VIDEO OUT] connector
(1) DC12V input
Connect pin number 2 and / or 11 for DC12V (HOT) and pin number 1 and / or 10
for GND.
(2) Video output
Composite EIA video output (VS) is output from pin number 4(HOT) and
pin number 3(GND).
(3) Input pulses for external sync
When required external sync-operation between other equipment, use either one of
pulse for HD/VD, VS or SYNC. And input HD pulse form pin number 6-5 (GND)
and VD from pin number 7-8 (GND) for HD / VD external sync-operation.
And input VS or SYNC from pin number 9-8(GND) for external sync operation
by VS or SYNC.
The alignment of the receptable dip
t
12 terminals (male) (rear view)
①
GND
②
DC 12V INPUT
③
GND(VIDEO)
④
VIDEO OUTPUT
⑤
GND
⑥
HD INPUT
⑦
VD INPUT
⑧
GND(VD)
⑨
VS(SYNC) INPUT
⑩
GND(VS)
⑪
DC12VINPUT
⑫
GND
④
[VIDEO] connector
Composite EIA video output(VS) is come out from this connector which is employed BNC
type.
7