Tokyo Electronic CS4000 SERIES, Operation Manual, Page: 15 / 23

10. SPECIFICATIONS
(1) TV system EIA
(2) Image sensor Interline CCD
①
Active pixel
768(H) x 494(V)
②
Active image area
a) 1/2 inches 6.45mm(H) x 4.84mm(V)
b) 1/3 inches 4.88mm(H) x 3.66mm(V)
(3) Number of scanning lines 525 lines
(4) Scanning system 2 : 1 interlace
(5) Sync. System Internal / External
(6) Scanning frequencies
①
Horizontal drive
15.734 kHz
②
Vertical drive
59.94 Hz
(7) Aspect ratio 4 : 3
(8) Illumination
①
Standard (F11, 3,000K, 100%output)
a) 1/2 inches(CSH4200) 1,200 lx
b) 1/2 inches(others) 800 lx
c) 1/3 inches 1,500 lx
②
50% Output (F1.4, 3,000K,
γ
:ON,AGC:AUTO, approx. 50%output)
a) 1/2 inches(CSH4200) 2.5 lx
b) 1/2 inches(others) 1.7 lx
c) 1/3 inches 3.0 lx
③
Minimum (F1.4, 3,000K,
γ
ON, AGC:AUTO, approx. 25%output)
a) 1/2 inches(CSH4200) 1.5 lx
b) 1/2 inches(others) 1.0 lx
c) 1/3 inches 2.0 lx
(9) Video output VS=1.0 Vp-p/75
Ω
,positive polarity
(10) Resolution
①
Horizontal
570 TV lines
②
Vertical
350 TV lines
(11) S/N (luminance) 50 dBp-p/rms or more
(12) External sync. Input HD 4 ± 2Vp-p/High impedance, negative polarity
15.734kHz ± 1%
VD 4
±
2Vp-p/High impedance, negative polarity
59.94Hz ± 1%
SYNC 2 ± 1Vp-p/75
Ω
, negative polarity
Horizontal: 15.734kHz
±
1%
Vertical: 59.94Hz
±
1%
VS 1.0Vp-p/75
Ω
, positive polarity
Horizontal: 15.734kHz
±
1%
Vertical: 59.94Hz
±
1%
(13) Signal output
①
HD
TTL level, negative polarity
②
VD
TTL level, negative polarity
③
SYNC
TTL level, negative polarity
(14) Gamma correction ON(0.45) / OFF(1.0) selectable
(15) Gain control AUTO/STD/MANU
Video level can be adjustable by [GAIN]
potentiometer when MANU.
14