Tokheim OPTimum IQ 6000, Technical Manual

Page: 12 / 62

Page 1-6
Document Ref 907186-001 Rev 1
OPTimum IQ 6000 Component Technical Manual
1.5.5 PERSONAL PROTECTIVE EQUIPMENT (PPE)
PROTECTIVE CLOTHING
The following clothing should be worn at all times during installation and
maintenance procedures:-
•
Protective helmet.
•
Protective shoes (conductive).
•
Protective gloves and/or protective hand cream.
•
Anti static clothing.
•
Eye protection.
SAFETY EQUIPMENT FOR WORKING IN HAZARDOUS AREAS
The following safety equipment is required for working in hazardous areas:-
•
Only spark free tools are permitted for work on dispensers.
•
Work on bearings is only permitted using the standard workshop tools authorised
for this kind of work.
•
The use of all electrical tools is strictly prohibited.
•
Only the use of explosion protected work lights is permitted.
•
The use of telecommunications equipment in hazardous areas is strictly
prohibited.
SAFETY INSTRUCTIONS
The following safety instructions must be adhered to during installation and
maintenance procedures:-
•
Inhalation of petrol vapour must be avoided. Suitable precautions must be
taken and where necessary respirators used.
•
Avoid direct contact of fuel with the skin.
•
Use suitable protective clothing, protective gloves and/or protective hand cream.
•
Avoid fuel spills.
•
No smoking, no naked flames are permitted.
•
Long hair and ties can get caught in moving parts. Hair must be suitably covered.
1.6 Standards & Certificates
Tokheim OPTimum and BNA standalone units are constructed in conformity with the
requirements of all the applicable European Directives (Machinery 98/37/EC; EMC 89/
336/EEC; ATEX 94/9/EC).
Dispenser integrated terminals are incorporated into Tokheim fuel dispensers which
conform to the essential requirements of the Machinery Directive 98/37/EC.
The components used within the OPTimum, including connection facilities, are selected
in accordance with the European Standard EN 50014 (Electrical apparatus for potentially
explosive atmospheres), and the supplementary Standards listed therein.
Issue A