PAGE 6 OF 9
NOVEMBER 2001
IM-261101-CWC-R0
CardTool Removal
To remove the CardTool, either use the thumb stop on the back of the unit to gradually push it out of
the expansion slot or grab the CardTool at the base of the card slot and pull it away from the
Handspring Visor in the same plane as the expansion slot. Try not to grab the CardTool by the top
and bottom but rather each side at the base of the card slot. Grabbing the top and bottom of the
CardTool will generate a force component, which will increase the friction and make it harder to
remove.
When the CardTool is removed from the Handspring Visor, the following takes place.
Applications that were automatically installed when the CardTool was inserted are automatically
uninstall from the Visor application menu.
Note: If the Visor is turned off, removal of the CardTool (or any other module) turns the Visor on.