Tokai SF-8022, User Manual

Page: 15 / 57

15
SAFETY INTRUCTIONS
1. READ INSTRUCTIONS --- All the safety and
operating instructions should be read before the product
is operated, followed and retained for future reference.
2. CLEANING --- Unplug this product from the wall
outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
3. WATER AND MOISTURE --- Do not use this product
near water - for example, near a bath tub, wash bowl,
kitchen sink, or laundry tub; in a wet basement; or near a
swimming pool; and the like.
4. ACCESSORIES --- Do not place this
product on an unstable cart, stand, tripod,
bracket, or table. The product may fall,
causing serious injury to a child or adult
and serious damage to the product. Use
only with a bracket, or table recommended by the
manufacturer, or sold with the product. Any mounting of
the product should follow the manufacturer instructions,
and should use a mounting accessory recommended by
the manufacturer. A Product and Cart Combination
should Be Moved with Care - Quick stops, excessive force
and uneven surfaces may cause the product and cart
combination to overturn.
5. VENTILATION --- Slots and openings in the cabinet
are provided for ventilation and to ensure reliable
operation of the product and to protect it from
overheating, and these openings must not be blocked or
covered. The openings should never be blocked by
placing the product on a bed, sofa, rug or other similar
surface. This product should not be placed in a built-in
installation, such as a bookcase or rack, unless proper
ventilation is provided or the manufacturer* instructions
have been adhered to.
6. POWER SOURCES --- This product should be
operated only from the type of power source indicated on
the marking label. If you are not sure of the type of
power supply to your home, consult your product dealer
or local power company. For products intended to
operate from battery power, or other sources, refer to the
operating instructions.
7. POWER-CORD PROTECTION --- Power-supply
cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against
them, paying particular attention to cords at plugs,
convenience receptacles, and the point where exit from
the product.
8. NON-USE PERIODS --- The power cord of the
product should be unplugged from the outlet when left
unused for long periods of time.
9. LIGHTNING --- For added protection for this product
during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the antenna or cable
system. This will present damage to the product due to
lightening and power-line surges.
10. OVERLOADING --- Do not overload wall outlets,
extension cords, or integral convenience receptacles as
this can result in a risk of fire or electric shock.
11. OBJECT AND LIQUID ENTRY --- Never push
objects of any kind into this product through openings as
they may touch dangerous voltage points or short-out
parts that could result in a fire or electric shock. Never
spill liquid of any kind on the product.
12. SERVICING --- Do not attempt to service this
product yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer
to all servicing to qualified service personnel.
13. DAMAGES REQUIRING SERVICE --- Unplug this
product from the wall outlet and refer servicing to
qualified service personnel under the following
conditions.
a) When the power-supply cord or plug is damaged.
c) If the product has been exposed to rain or water.
b) If liquid has been spilled, or objects have fallen into
the product.
d) If the product does not operate normally by following
the operating instructions. Adjust only those controls
that are covered by the operating instructions as an
improving adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the product to its
normal operation.
e) When the product exhibits a distinct change in
performance - this indicates a need for service.
14. REPLACEMENT PARTS --- When replacement
parts are required, be sure the service technician has
used replacement parts specified by the manufacturer or
have the same characteristics as the original part,
Unauthorized substitutions may result in fire electric
shock and other hazards.
15. HEAT --- the product should be situated away from
sources such as radiators, heat registers, stoves or other
products that produce heat