Todd English PRO-SMART 38051, Owner'S Manual

Page: 25 / 36

n
uwavenow.com | 25
3. Press any other key to return to
the cooking screen.
4. Press Stage to review the next
cooking phases if needed.
Notes
• To insert a new stage while cooking,
press and hold Stage until the unit
beeps twice.
• You need multiple stages to enter
Review mode using Stage .
• If, while reviewing a Preset’s settings,
the unit goes to the next stage, the
settings for that next stage will be
displayed.
• While in Review mode, to add the
Probe function to a given stage, press
and hold Probe .
Edit and Save a Preset
Presets can be edited and saved before,
during, and after cooking.
Before Cooking
1. Press Menu . “Menu 1” will be
displayed.
2. Pick the Menu number to edit with
the START/PAUSE dial.
3. Press Stage or Temp/Time to
review. Adjust with the START/
PAUSE dial as needed.
4. Once all adjustments are made,
press Menu and turn the START/
PAUSE dial to choose the new
Menu number.
5. Press and hold Menu until the
unit beeps twice and “SAVE” is
displayed to store the new Preset.
While Cooking
1. Recall the Menu number you wish
to edit.
2. Press Stage repeatedly to find
the function to edit, then set the
cooking temperature with the
START/PAUSE dial.
3. Press Temp/Time then turn the
START/PAUSE dial to set the
cooking time.
4. Press Stage . Repeat steps 2 & 3 to
adjust more functions.
5. When ready, press Menu and
pick a new Menu number with the
START/PAUSE dial.
6. Press and hold Menu until the
unit beeps twice and “SAVE” is
displayed to store your new Preset.
Light
• Press the button to turn the interior
lamp on or off.
• The Light default will always be OFF.
Notes
• Turning off the unit will also turn off the
lamp.
• When the cooking cycle ends, the lamp
will turn off.
• While cooking, the lamp is off and
cooking will pause when the door is
opened. If it’s on, but the door is open
over 5 minutes, the lamp will turn off but
the unit will still be paused.
Clock
1. Press
P Temp/Time
. The
display will show
“12:00”
and
“:”
will flash. If the clock was previously
set up, it will show the current time.
BASIC FUNCTIONS