Todd English PRO-SMART 38051, Owner'S Manual

Page: 21 / 36

n
uwavenow.com | 21
remaining cook time.
• If the Probe is unplugged, the Probe
function will be canceled.
• If the Probe is unplugged while
cooking, then plugged back in, the unit
will return to the programmed Probe
function.
• While in Review mode, to add the
Probe to a given cooking stage, press
and hold Probe . This will add the
Probe function to this stage, defaulting
to “OFF” . At this time, turn the
START/PAUSE dial to the right and it
will display
“50°F”
again (the Probe
function is engaged again). If the
current stage has no Probe function,
the unit will display “OFF” .
Carryover Cooking
After setting the Probe target temperature,
you can stop cooking at the set Carryover
target temperature (10°F–30°F below the
Probe target temperature). While resting,
the internal temperature will continue
to rise until it reaches the Probe target
temperature.
1. Press and hold Probe until the screen
shows “OFF” then press and hold
Probe
again will show
“165°F”
,
“Probe” , and “Temp” . You can adjust
the Probe target temperature.
2. Press Probe + Stage . The unit will
beep twice and display “10°F” ,
“Temp”
.
3. Adjust this number as needed up to 30°F
turning the START/PAUSE dial, then
press START/PAUSE to begin cooking.
4. Once the Carryover temperature is
reached,
-CO-
will flash, and the unit
will beep 3 sets of double beeps.
5. When the Probe target temperature is
reached the unit will beep 3 times and
“END” will display.
Notes
• If the probe temperature is not achieved
the unit will revert to the last cooking
temperature and continue to cook at
that temperature until the adjusted
Probe Temperature is reached.
• Press Probe + Stage and the unit will
display the set carryover temperature,
can also be adjusted at any time
• Press and hold Probe to display the
Probe target temperature, which you
can then adjust. Once the Probe target
temperature is adjusted, the target
temperature for main cooking will be
adjusted accordingly, automatically.
Correct placement
of the Probe cable.
Avoid touching bone
when inserting the
Probe. When air frying,
make sure to insert the
Probe directly into the
center (from the side)
of any meat you plan to
flip. Avoid inserting the
Probe at an angle.
Probe and Probe Cable Placement
BASIC FUNCTIONS