Trouble Shooting
Trouble Shooting
30
Problem
The display on the front
panel does not light up.
●
Main cable is not connected.
●
Check that the main cable is
plugged into the power socket.
No sound or picture, but the
front panel shows red light.
●
The receiver is in standby mode.
●
Press the standby button.
No sound or picture.
●
The satellite dish is not pointing
at the satellite.
●
Adjust the dish. Check the signal
level in the Antenna Setup menu.
Bad picture / blocking error.
●
Satellite dish is too small.
●
Change to a larger dish.
The RCU is not working.
●
Battery exhausted.
●
Change the batteries.
●
RCU is incorrectly aimed.
●
Aim RCU at the , or check that
nothing blocks the front panel.
●
LNB noise factor too high.
●
Change to an LNB with lower
noise factor.
●
The LNB is faulty.
●
Change the LNB.
●
No signal or weak signal.
●
Check the cable connections, LNB
and other equipment connected
between the LNB and the receiver,
or adjust the dish.
●
The satellite dish is not pointing
at the satellite.
●
Adjust the dish.
●
Signal is too strong.
●
Connect a signal attenuator to the
LNB input.
Possible causes
What to do
Note
If you have tried all of the actions suggested above, without solving the problem, please contact
your dealer or service provider.