9
Product Care
9.1
Temperature & Humidity
9.1.1
General Use
The Tobii Dynavox I- is best kept in dry conditions at room temperature. The recommended range for temperature and
the humidity value for the device is as follows:
Portable mode:
•
Ambient temperature: 0
℃
to 30
℃
(32
℉
to 86
℉
)
•
Humidity: Max 70% (no condensation on the device)
Mounted mode:
•
Ambient temperature: 0
℃
to 37
℃
(32
℉
to 99
℉
)
•
Humidity: Max 70% (no condensation on the device)
9.1.2
Transportation and Storage
For transportation and storage excluding batteries the recommended range for temperature and the humidity value for the de-
vice is as follows:
•
Temperature: -40
℃
to 70
℃
(-40
℉
to 158
℉
)
•
Humidity: 20% to 70% (no condensation on the device)
The Tobii Dynavox I- is not waterproof or fully water resistant. The device should not be kept in excessively humid, damp
or otherwise wet conditions. Do not submerge the device in water or in any other liquid. Be careful not to allow liquids to be
spilled upon the device especially in the connector areas without the I/O covers in place(Position 29 in
Figure 3.2 Bottom, Left
and Right Side, page 17
). The device is registered as IP Class 43 (with I/O covers in place).
9.2
Cleaning
Before cleaning the Tobii Dynavox I- device shut it down, unplug all cables, attach the I/O covers (Position 29 in
Figure
3.2 Bottom, Left and Right Side, page 17
) and remove the batteries. Use a soft, slightly damp, lint-free cloth or Alcohol Cleaning
Wipes (i.e. damp cloth with 96% alcohol). Avoid getting moisture in openings on the device. Don’t use window cleaners, house-
hold cleaners, aerosol sprays, solvents, alcohol, ammonia, or abrasives to clean the device.
9.2.1
Cleaning of the Speakers
If the openings for the speakers are clogged carefully use cotton sticks and/or a toothbrush to avoid damaging the IP-protection
for Tobii Dynavox I- speakers.
9.3
Placement
Only use the recommended mounts specified by the your local reseller or sales represent and make sure that they are mounted
and fastened correctly according to the instructions. Do not place the device on unstable and uneven surfaces.
9.4
Transporting the Tobii Dynavox I- Device
Disconnect all the cables and use the handle on the back side of the device to hold the device while carrying it.
When you transport the device for repair, shipment or traveling, use the original casing and packaging materials.
Keep the original packaging materials for the Tobii Dynavox I-.
In case the device needs to be returned to Tobii Dynavox for Warranty related issues or repair, it is required that the
original packaging (or equal equivalent) is used for shipping.
Tobii Dynavox I- User’s manual v.1.4 - en-US
9 Product Care
79
