11
Mobile Testing
Accessory User’s manual v.1.1 - en-US
5.4
Assemble the Mobile Testing Accessory
Now it’s time to put your Mobile Testing Accessory together. It will look like this when it is assembled:
Figure 5.7
The fully assembled Mobile Testing Accessory
1. Remove the protective plastic from a Sticky Pad and attach it to the Device Holder by pressing gently. If the Sticky
pad is not sticky, clean it with some water.
2. Attach the mobile device to the Device Holder by placing the mobile on the sticky pad and pressing gently. Make
sure that the mobile is aligned with the top of the Device Holder.
Figure 5.8
The mobile device attached to the Sticky Pad on the Device Holder
The Sticky Pads are made for reuse. If you find that one of the Sticky Pads is not holding the mobile de-
vice securely, clean it with cold water to remove any particles.
You can easily remove the mobile device whenever you want by pulling the mobile device gently away
from the Sticky Pad attached to the Device Holder. There should be no residue stickiness left on the mo-
bile device. If the Sticky Pad is dirty, clean it with cold water only. This will reactivate the adhesive and re-
move any unwanted dirt.
