Tobii Dynavox T10+, User Manual, Page: 8 / 32

Restrictions specified on other equipment or network/data couplings to which a signal input/output part may be
connected.
Do not open the enclosure, stretch the openings, or touch the camera and the inner circuit.
This T-Series device presents a risk of electrical shock if the casing is opened. Do not open the casing that surrounds
the device.
Do not use the device during thunder or electrical storms. There is a risk of electric shock and damage to the device.
During storms, shut down and unplug the device.
Do not put the device screen or charging indicator light close to your eyes. Doing so could result in damage to the
eyes.
If the screen is uncomfortable to look at, turn down the screen brightness or power off the device.
When connecting headphones to the device, ensure that the device volume is set low in order to protect the ears
from potential harm.
The device can only be connected with other accessories and equipment which has been approved to be used safely
without danger of high voltage. Use of unapproved accessories may result in electric shock.
Your T-Series device is not suitable for use in the presence of flammable anesthetics or other combustible materials
such as fuels and chemicals.
Do not charge, power on, or use the device near combustible fuels or chemicals, such as at a gas station.
Your T-Series device conforms to IP22. IP22 explanation: the first digit [2] indicates the level of protection that the en-
closure provides against access to hazardous parts [e.g. electrical conductors, moving parts] ,and the ingress of for-
eign objects. Level 2 provides protection to an object >12.5 mm [fingers or similar objects]. The second digit [2]
indicates the level of protection that the enclosure provides against harmful ingress of water. Vertically dripping water
shall have no harmful effect when the enclosure is tilted at an angle up to 15 degrees from its normal position.
You T-Series charger conforms to IP21. IP21 explanation: the first digit [2] indicates the level of protection that the
enclosure provides against access to hazardous parts [e.g. electrical conductors, moving parts] ,and the ingress of
foreign objects. Level 2 provides protection to an object >12.5 mm [fingers or similar objects]. The second digit [1] in-
dicates the level of protection that the enclosure provides against harmful ingress of water. It is protected from
condensation.
When you are charging your T-Series device, remember that the main outlet that you will be using to power the adapt-
er must be accessible from within 6 feet (2 meters) of the device. There should be no switches or disconnect devices
in the ground conductor.
The plug of the power adapter is used as the isolation means from mains. Do not position the device in such a way
that the plug is difficult to disconnect.
Use care when installing and routing cables and accessories to avoid tangling and a possible tripping hazard.
Running the T-Series device for a long time may cause the temperature to temporarily rise to above 105 ℉ / 41 ℃ .
Please power off the T-Series device if it is overheating. Do not hold an overheating device in your hands; place it on
a hard, heat-resistant surface in an area with air flow to allow heat to dissipate.
The edge of the display can reach temperatures of up to 49 ℃ /120 ℉ . To prevent burns, do not touch the edge of the
display for longer than 1 minute continuously.
The touch screen can reach temperatures of up to 46 ℃ /115 ℉ . To prevent burns, do not touch the screen in excess
of 10 minutes continuously.
8
2 Safety #401487-F T-Series Devices User’s manual v.2.2 - en-US