6
6. Remove bread from Toasting Slots. Use care when removing bread
as the bread and Toaster will still be hot.
7. Unplug cord from wall outlet when not in use.
IMPORTANT: Never use a fork or sharp-edged utensil to remove
toast, because that may damage the heating element or
cause injury.
CANCEL Button
To stop or interrupt any Toasting cycle, press the CANCEL Button. The
bread will automatically rise and the Toaster will turn off.
Convenience Food Toasting
Extra wide Toasting Slots accommodate many varieties of packaged
convenience food available today, both frozen and non-frozen (shelf
pastry). Since toaster foods and individual tastes vary, it is difficult to
recommend exact Toast Color Control settings. However, after a little
experimentation you will discover the best setting for your needs. You
may also wish to refer to the heating instructions on food packaging.
Pastry
For best results, follow the instructions printed on the pastry package.
If the package does not have instructions, position the Toast Color
Control to Medium (mid-way between Light and Dark). Some pastries
may require a second toasting cycle.
NOTE: Do not use this Toaster for toasting pastry items with runny-
type frosting or open fillings.
Non-Frozen Shelf Pastry
Move the Toast Color Control to a lighter setting. For thicker
convenience foods, it may be necessary to turn the Toast Color Control
clockwise for a longer toasting cycle.
Operating Instructions
(continued)
5
Before Using For The First Time
1. Remove all packaging materials including those which may be
inside the Toasting Slots or Toasting Lever slot.
2. Wipe the exterior with a damp cloth. Dry thoroughly. Do not use
abrasive cleaners.
3. Do not put the Toaster, cord or plug in water.
4. Be sure the Crumb Tray is pushed all the way into the Toaster and
the Toasting Lever is in the UP position.
5. Unwrap power cord from Cord Storage Area on underside of
Toaster and plug into a 120V AC outlet.
6. Turn the Toast Color Control to the lightest setting.
7. Lower the Toasting Lever until it locks in place. Operate without
bread once or twice to burn off any manufacturing residue. You
may notice a slight amount of smoke; this is normal and will stop
as the heating elements continue to heat.
Operating Instructions
1. Be sure no bread or other objects are inside the Toasting Slot.
Place Toaster on a flat, level, heat resistant surface and plug the
power cord into a 120V AC electrical outlet.
2. Position the Toast Color Control to desired setting. The first time
you toast, it is best to use both Toasting Slots; position the Toast
Color Control to Medium (mid-way between Light and Dark); then
adjust each subsequent toasting to your preference.
3 Remove all protective wrappings from food before placing into
the Toasting Slots. Avoid toasting torn bread slices that may get
lodged in Toasting Slot.
4. Insert the bread into the Toasting Slots. Lower the Toasting Lever
until it locks into place. When the bread is lowered into position,
it will automatically begin to toast.
NOTE: The Toasting Lever will not lock into position unless the
Toaster is plugged in!
NOTE: When toasting a single slice, the bread may be placed in
either Toasting Slot.
NOTE: To prevent a fire hazard, never place bread over the opening
of the Toaster, but always place it into the Slots.
NOTE: DO NOT change the Toast Color Control selection during the
toasting cycle. First press the CANCEL Button; then turn the Toast
Color Control to adjust the browning level. Replace bread and
toast until the desired toast color is achieved.
5. When the toast reaches the selected browning level, it will pop
up automatically.
TMR_TMT2RET/TMT2RETB_IB_6-7-06 7/7/06 6:38 PM Page 11
