![background image](http://html.mh-extra.com/html/toastmaster/tmsm350/tmsm350_use-and-care-manual_1124043009.webp)
9.
8.
Electric Stand Mixer Use and Care Guide
Care And Cleaning
1. Unplug Stand Mixer from outlet.
2. The Mixing Bowl, Beaters Dough Hooks and Wire Whisk may be
washed in the dishwasher.
3. Wipe the Stand Mixer and Turntable with a damp cloth. Do not
use any abrasive cleaning materials. Never immerse or clean
under running water.
Helpful Hints For Bread And Dough
Bread Dough Ball:
Necessary For A Successful Loaf of Bread
The amount of bread flour called for in each recipe is to be used as a
guide. We have found it may vary slightly because different climates
and seasons result in a wide variety of humidity levels. Watch the
dough as you add the last 1 - 1
1
⁄
2
cups of flour. A good dough ball
should be round, smooth-textured, soft and slightly tacky to the
touch. If it does not form a ball and is more like a batter, add flour
until it reaches the appropriate consistency.
Mixing & Kneading:
The Gluten Development Stage
Place ingredients in bowl, except last 1 - 1
1
⁄
2
cups flour. Use the Dough
Hooks at the beginning of the mixing stage to start the gluten
development. Then gradually add enough of the remaining flour to
make a soft dough. The dough should clean the sides of the bowl and
form a soft ball around the Dough Hooks.
When adding wheat bran, wheat germ, bulgur or cracked wheat to a
bread recipe, leave the dough as moist as possible, because these
ingredients absorb liquid and tend to produce a drier loaf. Reduce
the amount of kneading to avoid cutting the gluten strands with the
sharp edges of these grains.
A recipe with a high percentage of whole wheat flour may require a
shorter kneading time than a recipe with white flour. The rough
texture of the bran can be damaging to developing gluten.
How To Use Your
Electronic Stand Mixer (cont.)
8. Plug into 120 V ~ 60 Hz outlet. Turn the Variable Speed Control
to the Minimum position. Slide the ON/OFF Power Switch to
the ON position. The Power Light will come on.
NOTE: Always start mixing on the Minimum speed. The
operating speed increases as the Variable Speed Control is moved
from Minimum to Maximum speed, see FIGURE 5.
Select the desired speed. Refer to mixing guide on page 5 for
further information.
9. Turn the Mixer speed to the Minimum position and the
ON/OFF Power Switch to OFF position before attempting to
scrape sides or bottom of Stainless Steel Mixing Bowl.
NOTE: DO NOT scrape sides or bottom of Stainless Steel Mixing
Bowl while Mixer is in operation.
10. The Turbo Button may be used at any speed setting to obtain the
Maximum power lever for tough mixing tasks.
11. Once all ingredients have reached the desired consistency, turn
the Variable Speed Control to the Minimum position and
slide the ON/OFF Power Switch to the OFF position. The Power
Light will go off.
12. Unplug cord from outlet.
13. Press and hold the Release Button while raising the Mixer Head.
14. Press the Eject Button and remove the Beaters, Wire Whisk or
Dough Hooks. Gently scrape excess batter from Beaters or Dough
Hooks with a rubber or plastic spatula. Do not strike Beaters or
Dough Hooks against Mixing Bowl to remove excess batter. This
could damage the Mixer parts.
15. Carefully remove Mixing Bowl from Turntable. Pour ingredients
from bowl into desired container. Use only a rubber or plastic
spatula to remove batter from Mixing Bowl.