background image

16

Warranty Statement

Toastmaster warrants equipment that it manufactures to be free from defects in material and 

workmanship. Toastmaster’s obligation is limited to repairing or replacing, at Toastmaster’s option, without 

cost to the customer, any part found to be defective, as well as any labor or material expense required to 

replace the part.

Length of Warranty

This warranty is effective for a period of 12 months from the date the equipment is placed in service.

Exceptions

•   This warranty is valid only for the original end user owner/operator of the equipment. 
•   This warranty does not apply to normal maintenance functions, including (but not limited to) 

improper operation, installation or the use of an improper utility supply.

•   This warranty is valid only if the equipment is used in a commercial setting. The equipment 

is designed and constructed for commercial use by trained professionals only. Any use of the 

equipment in private or domestic applications immediately voids this warranty.

•   This warranty does not apply to any parts, labor and material expenses for service that is not 

pre-approved and performed by a Toastmaster authorized service agent. Any such service 

immediately voids this warranty.

•   This warranty does not apply to any parts, labor and material expenses associated with the 

installation of parts that are not factory-approved for use in the equipment. Any use of such 

parts immediately voids this warranty.

•   This warranty is not valid if terms of payment have not been met.

Parts Warranty

Parts that are sold to repair our of warranty equipment are warranted for ninety (90) days.  The part 

only is warranted, the labor to replace the parts is NOT warranted.

Portable Equipment

Toastmaster will not honor service bills that include travel time and mileage charges for servicing any 

products considered “Portable”.  These products should be taken to the Service Agency for repair.
A portable unit is a unit thats designed to sit on a countertop, has a powercord & is less than 50lbs 

installed.

Toastmaster reserves the right to change the design and specifications of this equipment or any related 

documentation at any time. The end user is not entitled to upgrades resulting from these changes.
This warranty is exclusive and supersedes all other warranties for the equipment, both expressed and 

implied. There are no implied warranties of merchantability or of fitness for a particular purpose.

The foregoing is Toastmaster’s sole and exclusive obligation and the end user sole and exclusive remedy 

for any action including breach of contract or negligence. In no event shall Toastmaster be liable for a sum 

in excess of the purchase price of the equipment, or for any prospective or lost profits of the end user.

is a registerd trademark of Toastmaster, A Middleby Company.  All rights reserved.

Summary of Contents for TCT1

















Reviews: