3
CHOPPING BLADE AND DISKS
CHOPPING BLADE
Can be used to chop meat, fruits, vegetables, bread, crackers,
and to mix ingredients.
GRATING DISK
Can be used for fru i t s, ve g e t a bl e s, chocolate, cheese.
Reversible to FINE or COARSE.
SLICING DISK
Can be used for fruits, vegetables, chocolate and cheese.
Reversible to FINE or COARSE.
MINCING DISK
Can be used for hard cheeses, chocolate, garlic and nuts.
Be sure to fill out warranty service information.
USING YOUR FOOD PROCESSOR
1. Before using, clean all parts, see CARE AND CLEANING.
2. Place stand mixer on a dry level surface and turn swivel arm to position #5,
(see figure 1). Make sure the speed control dial is in the Off position.
3. Place bowl onto the handle and turn counter clockwise until the bowl tab locks
below the handle slot, (see figure 2).
4. If using the chopping blade, remove covers, insert into bowl, and place food in
bowl, (see figure 3).Or, insert disk holder and disk, (see figure 4).
5. Place the cover onto the bowl so that the arrows on the cover and handle line
up. Turn the cover counter clockwise until the tab on the cover is inserted into
the slot of the handle, (see figure 2). Insert the food pusher into the feed tube.
6. R e m ove cover from dri ve mechanism “ c ” . Place the food processor accessory
onto drive mechanism “c” lining up the arrows on the base of the handle and
the stand mixer. Turn the food processor counter clockwise until securely in
place (1/4 of a turn), (see figure 1).
NOTE: If the food processor drive will not connect to the stand mixer, the cover on
the food processor is not positioned correctly. Repeat steps 5 and 6 above.
7. If using a disk to process food, remove the food pusher and fill the feed tube.
