8.
Blender Use and Care Guide
Care And Cleaning
1.
Press the ON/OFF switch to the OFF position (O) and unplug
the appliance.
2.
Grasp container handle and lift container from the blender
motor base. Rinse with water to remove any large food particles
that may have accumulated in the container.
3.
Insert container aligning the notches and grooves until it fits
securely into the blender motor base. Turn clockwise to lock.
4.
Add 11⁄2 cups warm, soapy water to the container and cover with
the lid assembly.
5.
Press the ON/OFF switch to the ON position (I).
6.
Press the HIGH button and then press the LIQUEFY button for a
few seconds.
7.
Press the STOP button to stop the cleaning process. Turn the
ON/OFF switch to the OFF position (O) and unplug the
appliance.
8.
Grasp container handle and lift container off of the blender
motor base. Remove lid and assembly and rinse container with
water. Repeat steps 1-7 as necessary.
9.
Unscrew collar from container and remove cutting assembly.
CAUTION: BLADES ARE SHARP. HANDLE CAREFULLY.
CAUTION: NEVER PLACE BLENDER MOTOR BASE OR
APPLIANCE IN WATER OR OTHER LIQUIDS.
10. Immediately after each use, disassemble lid and cutting assembly.
Carefully wash all parts in warm soapy water. Rinse and dry
thoroughly. Do not wash parts in dishwasher.
11. Do not use a harsh abrasive on any part of the blender.
12. Clean the exterior of blender motor base with a soft damp cloth
and dry.
13. Reassemble cutting assembly onto container. Place onto blender
motor base with lid assembly. Spin dry on LIQUEFY for
10 seconds. Remove lid assembly and store blender jar inverted
on base (see Figure 7).
