3
EMV CONFIGURATION
Your contactless reader will auto detect once plugged into your Toast system.
You’ll need to enable EMV for the ability to take chip card and contactless payments.
4. You’ll see an option for Card Readers below the EMV
settings. Your new contactless puck is listed as:
BBPOS Chipper 2X(USB)
Confirm this is listed. You may also be prompted to
update the reader’s software. If so, opt into the update.
If you have a second screen attached to your terminal - also
known as a guest-facing display - you may have an additional
swipe-only card reader. If you have this, make sure the
BBPOS Chipper 2X(USB) reader is set to
Guest Pay.
!
Note: Switching out readers automatically turns
the EMV setting off. Even if you’ve already
enabled it, EMV will need to be turned on again.
1. Once the puck has been properly plugged into your
Toast hardware, restart your terminal.
2. From the main menu in Toast, select
Device Setup.
3. In the list of settings, there will be an option
EMV Enabled.
Make sure that this is turned on.
