Part Names And Functions
Rear panel
Mixing input jack
Connects this jack to the 0 dBv, 600
ohms, unbalanced output jack of
another WT-740U.
Antenna input connector
(BNC, 75 ohms)
Connects to an optional dipole antenna
"YW-450U" or an optional whip antenna
"YW-460U"
Mixed output level selector
This switch changes over the mixing
output level.
MIC : -65 dBv
LINE: 0 dBv
Mixed output jack
OUTPUT IMPEDANCE 600 ohms,
UNBALANCED.
The output signals from the tuner
modules 1 and 2 are all mixed and
provided from this jack. The output level
can be selected with the mixing output
level selector.
Individual output jacks
0 dBv, OUTPUT IMPEDANCE 600
ohms, UNBALANCED.
Each individual output signal from the
tuner modules 1 and 2 can be provided
from this jack.
Mounting The WTU-740U Tuner Module
CAUTION:
The setting of the tuner module WTU-740U has to be
done by a qualified service personnel.
1. Press the stopper of the tuner
panel with a screw driver.
3. Open the tuner panel.
4. Insert a tuner module.
2. Pull the tuner panel towards
you while pressing the stopper.
5. After checking to confirm the
tight connection of the tuner
panel connector, fit the tuner
panel in place.
6. Attach the frequency label
supplied with the tuner module
to the assigned space.