14
10.2. When Using an External CD Player
Step 1.
Connect the CD player or other sound source line output to the unit’s External Input terminal using a pin
cable. Input sensitivity is –20 dB, 10 kΩ. (0 dB = 1 V)
Step 2.
Adjust the volume with the External Input Volume control.
Note :
The External Input terminal is monaural. Even if the input signal is in stereo, it is played back in single-channel
monaural.
0
10
LINE OUT
AUX IN
LOW
AUX IN (MONO)
HIGH
WIRED MIC
TONE
External input volume control
External input terminal
Pin cable
2
1
Step
Step
CD player or other sound source
AM
FM
CH
MEMO
ST
SLEEP
ALARM
+5
MHZ
KHZ
TR 18 72 : 29 ESP
CD
FM TUNER
OPEN
OPEN
Step 1.
Connect the external speaker to the External speaker terminal.
Step 2.
Using the Internal or External speaker switch selection, and select to external speaker only.
•
: Enables the internal speaker only.
•
: Enables the external speaker only.
* External speaker
Recommended TOA speakers:
- BS-1030B
- BS-1030W
- SC-630
black wire
black
wire
white wire
white
wire
* ST-16
or
External speaker terminal
Select to External speaker switch
1
2
Step
Step
Ω
Ω
External speaker only
Internal speaker only
External speaker
30W minimum rated input,
Impedance 4 - 16 .
OPEN
External speaker only
Internal speaker only
