8
7. RACK MOUNTING
[When mounting a single VP-1061 or VP-1121]
Prepare the optional MB-25B-BK Rack Mounting Bracket.
Step 1.
Attach the Mount Bracket to the unit's
side using 2 machine screws M4 x 16
and 2 washers supplied with the MB-
25B-BK.
Step 2.
Attach the mount Bracket to the Blank
Panel using 2 tapping screws 4 x 10
supplied with the MB-25B-BK.
Step 3.
Attach the Blank Panel to the other side
of the unit using 2 machine screws M4 x
16 and 2 washers supplied with the MB-
25B-BK.
Tapping screws 4 x 10 *1
Rack Mount Bracket *1
Blank Panel *1
Washers
Machine screws
M4 x 16*1
1
2
3
*1 : components of the MB-25B-BK
List of components of the MB-25B-BK
Mount Bracket
2
Blank Panel
1
Mounting screws
1 set
Step 1.
Secure the Joint Bracket supplied with
the MB-25B-J to the bottom sides of the
units using 2 supplied tapping screws 3
x 8.
Step 2.
Secure the supplied joint bracket to the
units' rear panels using 2 supplied
tapping screws 3 x 8.
Step 3.
Secure the supplied joint bracket to the
units' top panels using 2 supplied
tapping screws 3 x 8.
Step 4.
Attach one Mount Bracket to the side of
each unit as shown at right below using
2 sets of 2 machine screws M4 x 16 and
2 washers supplied with the MB-25B-J.
[When linking 2 VP-1061s or VP-1121s]
Prepare the optional MB-25B-J Rack Mounting
Bracket.
Tapping screw 3 x 8 (accessory)
Tapping screw 3 x 8 (accessory)
Joint Bracket (accessory)
Joint Bracket *2
2
1
Tapping screw 3 x 8
(accessory)
Joint Bracket *2
Mount Bracket *2
Washer *2
Machine screw M4 x 16 *2
3
4
List of components of the MB-25B-J
Mount Bracket
2
Joint Bracket
1
Mounting screws
1 set
*2 : components of the MB-25B-J
