Toa SX-2000 SERIES, Firmware Update Procedure

Page: 2 / 12

2
1. USB DRIVER INSTALLATION PROCEDURE
Shown below is the driver installation procedure that allows your PC to use USB.
Step 1-1.
Prepare the USB driver for the PC being used.
Shown below is an example of procedure to install the USB driver "CDM2.00.00 driver" for
Windows Vista, Windows XP, Windows Server 2003, or Windows 2000 on your PC running
Windows XP.
Unzip the downloaded CDM2.00.00.zip file. As an example, specify C:\CDM 2.00.00 as the unzip
folder.
Step 1-2.
Remove the protective cover on the device to be updated by unscrewing it with a Phillips
screwdriver.
0123
4
56
789 AB
C
D
EF
0123
4
56
789 AB
C
D
EF
SX-2000SM
SX-2100AI
Note
The appearance of the SX-2100AI's protective cover and its inside shown above also applies to all AI and AO units.
Reset key
Reset key
USB terminal
USB terminal
Fluorescent Display
Protective cover Screw
Protective cover Screw
DIP switch
Inside of the protective cover
Inside of the protective cover