133-01-471-4A
URL: http://www.toa.jp/
Traceability Information for Europe
Manufacturer:
TOA Corporation
7-2-1, Minatojima-Nakamachi, Chuo-ku, Kobe, Hyogo,
Japan
Authorized representative:
TOA Electronics Europe GmbH
Suederstrasse 282, 20537 Hamburg,
Germany
Bass-reflex type
Continuous pink noise: 250 W, Continuous program: 750 W
8
Ω
96 dB (1 W, 1-meter equivalent, measured at 4 m or 13.12 ft)
70 - 20000 Hz
3 kHz
Horizontal: 100 °, Vertical: 35 °
Woofer: 13 cm (5.12”) cone-type x 8
Tweeter: Balanced dome type x 24
4 – 5.5 m (13.12 – 18.04 ft)
(Speaker top, when installed in sport facilities 30 m or 98.42 ft in length)
Downward:
0º, 1º, 2º, 3º (when the supplied mounting bracket is used)
Horizontal (left or right): 5º, 10º (when the optional SR-PB5 Wall Pan Bracket is used)
M5 screw terminal, barrier spacing: 12.2 mm (0.48”)
Enclosure:
Plywood, black, urethane coating
Baffle:
Polypropylene, black
Punched net:
Rolled steel plate, black, acrylic paint
Mounting bracket: Rolled steel plate, black, acrylic paint
310 (w) x 1239 (h) x 341 (d) mm (12.2" x 48.78" x 13.43")
29 kg (63.93 lb) (including accessories)
Wall Pan Bracket:
SR-PB5 (to be used with SR-T5's accessory bracket)
Matching Transformer: MT-S0601
Enclosure
Power Handling Capacity
Rated Impedance
Sensitivity
Frequency Response
Crossover Frequency
Directivity Angle
Speaker Component
Recommended Installation
Height
Angle Adjustment Range
Input Terminal
Finish
Dimensions
Weight
Optional Product
SR-T5
Horizontal (left or right): 5º, 10º
Rolled steel plate, black, paint
4.1 kg (9.04 lb) (including accessories)
Pan bracket A ...... 2, Pan bracket B ...... 2, Hex bolt M8 x 25 ...... 16
Applicable Speaker
Angle Adjustment Range
Finish
Weight
Component Parts
10.1. SR-T5 Line Array Speaker
10.2. SR-PB5 Wall Pan Bracket (optional)
10.SPECIFICATIONS
Note:
The design and specifications are subject to change without notice for improvement.
Note:
The design and specifications are subject to change without notice for improvement.
• Accessories
Mounting Bracket A .................................... 1
Mounting Bracket B .................................... 1
Side cover .................................................. 5
Safety wire (20 cm or 7.87”) ....................... 1
Hex bolt M10 x 40 (w/washer) ................... 4
Eye bolt M10 x 30 ...................................... 1
Hex bolt M8 x 40 (w/washer) ..................... 2
Machine screw M4 x 10 (w/washer) ......... 10
