Toa SR-F1B, Operating Instructions Manual

Page: 3 / 14

Suspending the SR-F1B
Note: The SR-L1B can not be suspended.
Caution
The SR-F1B weighs approximately 37 kg. Confirm that the structure of installation place, and suspending wires or belts
are heavy-duty enough to support the total weight of the load before suspension. Secure to lock the fixing metals of the
suspending wire or belt to the speaker. TOA takes no responsibility for any accidents or injuries resulting from the fall
of the SR-F1B due to incorrect installation.
• As for the general suspending methods of the SR-F1 B, refer to the figures below.
Be sure to use two suspending wires or belts.
Fix them to the ceiling reinforcement
individually.
Even in case of oblique installation of the
speaker, be sure to use two suspending wires
or belts.
WARNING
Never suspend the speaker as shown in the figures below.
Never use a ringed one wire. Never suspend the speaker
with a single wire. Never link more than three
speakers vertically.
Never suspend the speaker using
the speaker handles.
3
Fitting metal supplied with the SR-F1B
32202 Ring/Stud Pan Fitting (Aeroquip made)
To suspend the SR-F1B from its stud,
prepare the following applicable metal.
32326 Stud Fitting (Aeroquip made)
Suspending metal
Ring
Stud