Toa SR-F1B, Operating Instructions Manual

Page: 1 / 14

OPERATING INSTRUCTIONS
SR-F1B
SR-L1B
SPEAKER SYSTEM
SUPER WOOFER SYSTEM
Note: The SR-F1B comes with two nuts on the bottom side, which
are used only for mounting the SR-F1B to an optional
speaker stand. Never use these nuts for speaker suspension.
SR-F1B
Electronic-controlled system (bi-amplifier driven system) with the AC-F1 Electronic Control Unit.
High power capacity of 120 watts continuous pink noise for low frequency and 80 watts for high frequency.
High-efficiency 30 cm (12") woofer using a 20 cm (8") large magnet.
HFD-651 type high power driver with LE Series Constant Directivity(CD) Horn (60° horizontal by 40° vertical).
Fixing metals for suspension provided on top and bottom sides of the enclosure.
Provided an angle of 15° at both sides of the enclosure to prevent mutual interference in high frequency range.
SR-L1B
Electronic-controlled system with the AC-L1 Electronic Control Unit.
High power capacity of 300 watts continuous pink noise.
Ultra-linear, high power 38cm (15") woofer.
General Features
Neutrik NL4MPR input connector.
APITON plywood enclosure with rugged FRP coating.
Removable punched metal front grill.
TOA Corporation
FEATURES
SR-F1B
SR-L1B