REMOTE SWITCH
220 - 2 V
AC
PRE-AMPLIFIER MIXER
model MX-113-AS
(BALANCE)
AUX 4
AUX 3
AUX 2
AUX 1
MIC 6
MIC 5
MIC 4
MIC 3
MIC 2
MIC 1
TOA Corporation
MADE IN CHINA
0dBV
0dBV
600
Ω
1k
Ω
-12dBV
600
Ω
-12dBV 10k
Ω
-12dBV 10k
Ω
-12dBV
-62dBV
10k
Ω
600
Ω
MIN MAX
VOICE SWITCH
30V 1A
50/60Hz
4W
6
［
Front
］
NOMENCLATURE AND FUNCTIONS
Microphone 1-5 Volume control knob
Adjusts the volume of the microphone connected
to each microphone input terminal.
Auxiliary 2, 3 volume control knobs
Adjust the volume of the equipment
connected to each auxiliary input terminal.
Microphone 6 / Auxiliary 1
volume control knob
Adjusts the volume the device
connected to the microphone
6 / AUX 1 input.
Output level indicator light
Displays the output level
※
Adjust the volume so that the peak indicator
light does not light up even at the maximum.
Power indicator light lights up
when the power is turned on
Power switch
Press to turn on and press again to turn
off the power.
［
Rear
］
Remote terminal
Connect this terminal to the remote power supply
of the PA amplifier. The PA amplifier can be
remotely power on or off.
Microphone 6 / Auxiliary 1 input terminal.
Connect either microphone 6 (phone jack)
or AUX 1 (RCA Jack).
Auxiliary 2-3 input terminal. Connect either a audio
phone jack or RCA jack.
Recording output terminal
Connect this terminal to a recording device.
Line output terminal
Connect to "line input" of PA amplifier.
Auxiliary 4 volume
Auxiliary 4 input terminal
Power plug
Microphone 1-5 input terminal
Note:
If both terminal are connected, the audio
jack will be take priority the RCA jack.
Safety ground terminal
To prevent shock, please connect this terminal to ground terminal.
［
Bottom
］
Voice switch function
On / off switch
Bottom plate
To set the voice switch function of
microphones 1 to 5, remove this bottom
plate.
（ P. 10 ）
PRE-AMPLIFIER MIXER MX-113-AS
POWER
SIGNAL
PEAK
MIC 1
MIC 2
MIC 3
MIC 4
MIC 5
MIC 6 / AUX 1
AUX 2
AUX 3
0
10
0
10
0
10
0
10
0
10
0
10
0
10
0
10
40
