42
Step 3. Perform network settings.
Set the necessary items on the Single Setting or Multiple Setting screen.
[Network settings screen for Single Setting]
[Network settings screen for Multiple Setting]
Item
Contents
A Name
Set the terminal name.
Initial setting: IP-A1SC15
Note
Names cannot be set in Multiple Setting. After all other Multiple Setting
items have been set, go back and set only the name individually.
Tips
• For usable characters, please refer to
.
• Max: 31 characters
B IP Address
Acquisition
Set the method for acquiring the IP address.
Initial setting: Manual
Note
The unit is not compatible with DHCP.
Always select Manual, and manually enter the unit's network address.
C IP Address
Set the unit's IP address.
In the case of Multiple Setting, since the IP addresses have consecutive
numbers, these are automatically set for all units. Therefore, enter the
smallest numerical value in the left-side field. The IP address of the
last consecutive number is displayed in the field at right.
Initial setting: 192.168.14.1
D Subnet Mask
Set the subnet mask.
Initial setting: 255.255.255.0
E Default Gateway
Set the default gateway.
Initial setting: 192.168.14.254
F HTTP port
Set the unit's HTTP server port number. Usually, this port is used in
its initial setting state.
Setting range: 80 and 1025 – 65535
Initial setting: 80
A
B
C
D
E
F
G
H
4
A
B
C
D
E
F
G
H
4
