background image

4

2. SUMMARY AND FEATURES

The IP-A1PC238 IP ceiling speaker is equipped with a built-in power amplifier and sound source 

memory. It can be connected to and used over a local network.
• Power is supplied by way of PoE (IEEE 802.3af) switching hubs.

• The IP ceiling speaker is compatible with the following broadcasting modes:

Internal sound source 

broadcasting mode 

Enables broadcast of up to 20 internal sound source files by means of 

control input or Remote API (HTTP).

VMS broadcasting 

mode

Enables  backchannel  audio  broadcast  from  the  VMS  (Video 

management  system)  software  using  the  common  protocol  for  IP 

cameras.

SIP broadcasting mode Enables SIP broadcasts from any voice communications device that 

utilizes the SIP protocol, such as SIP or IP telephone (IP-PBX) systems.

Multicast broadcasting 

mode

Allows up to 20 multicast ports to be set up, for 20 multicast audio 

stream paging groups.

• Orders of priority can be set among the various broadcasting modes, meaning higher priority 

broadcasts can interrupt and override lower priority broadcasts.

• Since the speaker is equipped with individual offset adjustable volumes for each broadcasting 

modes and patterns (internal sound source), actual broadcasting volume can be normalized or 

optimized.

• Broadcasts  can  be  controlled  using  Remote  API  or  control  inputs  from  connected  external 

equipment.

• Connected  external  equipment  can  be  controlled  by  control  outputs  in  synchronization  with 

speaker broadcasts.

3. ABOUT SECURITY MEASURES

• Ensure that sufficient security measures are taken on the customer’s own responsibility.

• TOA Corporation takes no responsibility for damage or loss caused by security-related problems, 

such as illegal access. 

• To help prevent illegal access to the speaker, be sure to change the user ID and password from 

those used for initial setup. For setting methods and other details, please refer to the separate 

setup manual which can be  downloaded from the TOA DATA Library (https://www.toa-products.

com/international/).

• Take utmost care in the management of the speaker’s communications password. 

Summary of Contents for IP-A1PC238















Reviews: