9
Step 4.
For vertical suspension:
Be sure to select wires, chains, and/or anchor shackles with a
safety factor appropriate to the weight of the speaker system.
Incorrect selection of these suspension components may cause
the speaker system to fall, potentially resulting in damage and/or
personal injury.
WARNING
Step 5.
Suspend the speaker system using appropriate commercially obtained wires, chains, or anchor
shackles.
To mount the speaker system horizontally, rotate the speaker system's rear plate 90° from the
factory-preset orientation. For details, refer to p. 5, Changing the orientation of rear plate.
Run the anchor shackles, etc. through the holes in the 2 suspension brackets and rear plate as shown
in the figure.
Suspension bracket (supplied)
Speaker grill
isfitted in the slot.
Step 5.
Replace the removed speaker grill.
Be sure to use the supplied hex head wrench
to tighten the fixing screws.
Turn the speaker system upside down.
Then, mount the suspension bracket
in the same manner as described
in steps 2 and 3.
Ensure that the sponge
Speaker
Sponge
Punched
grill
]
n
o
i
s
n
e
p
s
u
s
l
a
t
n
o
z
i
r
o
H
[
]
n
o
i
s
n
e
p
s
u
s
l
a
c
it
r
e
V
[
Rear plate
Anchor shackle
Suspension bracket
