8
Step 2.
For vertical suspension:
Remove the 2 front bar fixing bolts. (Below, upper)
For horizontal suspension: Remove the 4 front bar fixing bolts. (Below, lower)
Place the speaker system on a workbench when doing this work.
Front bar fixing bolts
Front bar
[Vertical suspension]
[Horizontal suspension]
Step 3.
Fix the suspension bracket and the front bar with the bolts removed in step 2.
Observe the following instructions to tighten the bolts securely.
Failure to do this could cause the speaker to fall, potentially
resulting in damage and/or personal injury.
•
Ensure that each bolt is correctly inserted into its slot before
tightening it.
•
Bolts can be tightened using either a Phillips screwdriver or a
wrench, but be sure to finish the tightening with the wrench to
ensure optimum tightness.
WARNING
The figure on the right is for the
horizontal suspension of speaker system.
For the vertical suspension, the work is
done on either module to be suspended.
Suspension bracket
(supplied)
Front bar
