6
1. Power Switch [
ON
/
OFF
]
Turning this switch on causes the amplifier to function, and turning it off causes the amplifier to
cease function.
Note : All input volume to be in the minimum position.
2. Power Indicator [POWER]
Lights green when the power switch is turned on.
3. Indicators [INPUT, OUTPUT, PEAK, PROTECT]
The Indicators are as follows from left to right :
Input Indicator [INPUT]
Lights green regardless of the input level control setting when an input signal level exceeds about –20 dB.
Output Indicator [OUTPUT]
Lights yellow when an output level exceeds about 1 W at an 8
Ω
load
Peak Indicator [PEAK]
Lights red when an output signal clips (distortion occurs).
Note : When the Peak indicator is lit, turn the input level control counterclockwise until its light
extinguishes or decrease the input signal level of the connected external device. Operating the unit
while the Peak indicator remains lit may cause the protection circuitry to be activated.
Protection Indicator [PROTECT]
Lights red when the protection circuitry is activated. (See p. 7; Protection Operation List.) When the
power is switched on, this indicator lights for about 2 seconds and then extinguishes.
4. Master Volume Control
Adjusts the overall signal level.
5. Bass Control
Adjusts bass response. Rotate clockwise to increase bass output, and counterclockwise to reduce it.
The center position provides flat characteristics.
6. Treble Control
Adjusts treble response. Rotate clockwise to increase bass output, and counterclockwise to reduce it.
The center position provides flat characteristics.
7. AUX Volume Control
Adjusts the AUX level.
8. MIC / LINE Volume Control
Adjusts the Microphone or Line level.
9. Switch Selector
Select to input LINE (0dB) or MICROPHONE ( -60dB).
10. AUX Input Terminal
Input type is unbalanced, using XLR connector type / phone plug
(combination type), Pin connector XLR : Pin 1, 3 : Earth, Pin 2: Hot
11. MIC / LINE Input
Input type is balanced, using XLR connector type / phone plug (combination type)
Pin connector XLR : Pin 1: Earth, Pin 2: Hot, Pin 3 : Cold
