11
10.2. Mounting on the ST-34B Speaker Stand [ optional ]
Note :
Refer to the instruction manual enclosed with the
Speaker Stand for its mounting details.
Step 1. Fix the bracket supplied with the speaker stand
to the speaker.
Step 2. Spread the tripod legs of the stand to their full
extension.
Note : Spread the tripod legs until the stays
extend horizontally.
Step 3. Mount the speaker with the bracket fixed onto
the stand.
Step 4. Determine the speaker direction, and tighten
the bracket fixing screw.
Step 5. Adjust the stand height.
10.3. Using as a Floor Monitor
Note : When installing the speaker system on slippery floor, put a non slip mat under the speaker.
Do not kick or stand on the speaker system, as this will damage the speaker.
Speaker
Bracket
(supplied with the stand)
Bracket fixing screw
Plain washer for M8
(supplied with the stand)
Speaker mounting screw M8
(supplied with the stand)
ST-34B Speaker stand
4
1
3
5
10.4. Attaching the Supplied Rubber Feet
Attach the rubber feet in the case of speaker storage or on-floor speaker installation.
Note : The rubber foot has a direction (back and forth).
Align the datum line on the rubber foot with the positioning mark ( ) on the speaker unit as shown
below.
Rubber foot
(accessory)
Screw M6 x 20 (accessory)
Datum line
Positioning mark
