HNW-500
System selection jumper
System selection terminal
Input terminal
High frequency level control jumper
High frequency level control terminal
High frequency output terminal:
Connects the solderless terminal of
the high frequency connecting cord.
Low frequency output cord
High frequency connecting cord
(supplied with unit)
Note
: High frequency level control jumpers are factory-preset to + 2 dB.
MOUNTING UNIT TO THE ENCLOSURE
Mount the dividing network before mounting the woofers.
When using the HNW-800 in the standard speaker system
(GS-382S or GS-302S), cut off one paired low frequency
output cord close at the base.
Mounting procedure:
1) Loosen six screws and remove the rear terminal board of the
enclosure.
2) Insert unit into the port, and fix it with the removed screws.
Take care not to hold the connecting cord between the dividing
network and the enclosure.
Note: Take care so unit may not contact sound-absorbing
materials in the enclosure.
PART DESCRIPTION
FREQUENT
RESPONSE
System selection : Install between terminal Nos.3 and 4
System selection : Jumper not installed
Frequency (Hz)
Frequency (Hz)
System selection : Install between terminal Nos.3 and 4
System selection : Jumper not installed
HNW-800
-
2
-
Summary of Contents for HNW-500
Page 4: ...DIMENSIONS mm ...
