<For the LM-62B/62C/65/65C units>
1. After determining the zone allocation, record it in the Station
Paging Table, part of Initial Checking Sheet for the system (CP-
66). Refer to tables 3 and 4.
2. Perform the wiring of the station paging assignment plug by
soldering according to the zone allocation determined. Refer to
Fig. 1 and Table 1.
3. Cut off unnecessary jumper wires (JP200 ~ JP800, JP201 ~
JP801, JP105 ~ JP805) of the LM unit according to the zone
allocation.
4. If the exchange is the EX-610, both No. 256 and No. 263 pins
of the assignment plug must not be connected to the GND pin.
To another
LM unit
Fig.4
Station Paging
Assignment Plug
Fig. 5 LM-62B/65 units
Bottom
Top
Bottom
Fig. 6 PI unit
– 24 –
