NOTES
1. To release at one time the data programmed into all the
Zones for this function.
2. Re-start at Step 1 when mis-dialing occurs.
(All other registrations remain valid.)
3. Switch C-1 must be "ON" to employ this function.
4. 2-Digit dialing is necessary even in the case of Zone No.1
to No.9.
Ex. Zone No.2
6. In the case "Paging Priority" function is adopted by the
DIP Switch SW-C-3, this registration should be made for
each Paging Zone of No.01 to No.31.
7. Zone number series of each exchange in Tie-line system.
Exchange "A" - - - - - No.01~15
Exchange "B" - - - - - No.16~30
Exchange "C" - - - - - No.31~45
6-13 PAGING ZONE (FUNCTION CODE 70)
ESTABLISHMENT OF EACH PAGING ZONE
Paging Zone No.
First Station No.
Last Station No.
(01~, 16~, 31~)
of the Zone
of the Zone
Paging Zone No.
First Station No.
Last Station No.
(01 ~, 16~, 31~)
of the Zone
of the Zone
Confirmation tone
New Registration finished?
Return
5. In the case "Paging Response Without Zone Number"
mode
is selected bv the DIP Switch
SW-C-7, this registration is essential.
Touch
Function Code
Touch
Step 1
Touch
Touch
(Confirmation tone
will be heard.)
— 32 —
