FUNCTIONS WHICH REQUIRE ADDITIONAL UNITS
Those functions of the CP-63 which require either the addition of specific units or processing in existing units are as mentioned
below. Before installation and adjustment of equipment, make sure to check your system.
(For Data Transmitting and Receiving units, refer to Part 2. "Function Selection for Data Transmitting and Receiving units" Page 49.)
Function
Talk- Back from
paging speaker
Conference
External PA Paging
Station Paging
Indication and
Control
Tie-line System
Additional Equipment
Required
Talk-Back Unit
Conference Unit
Paging Interface Unit
Paging Interface Unit
Data Transmitting Unit
Data Receiving Unit
Tie-line Interface Unit
Unit Model
Number
TK-12
CL-62
PI -62
PI-62
DT-E11
DR-B61
TI-62
Remarks
Not yet available for sale.
Build this unit in all exchanges connected by tie-line. It
is not possible to originate a conference from a station
connected to the exchange without the CL unit but
possible to participate in the conference from that
station.
External PA Equipment is required.
1. Wiring of "Station Paging Assignment" located at
the back of the frame of the Exchange.
2. Cutting of LM-62 jumper wire to split station paging
system.
The number that can be mounted on the cabinet-mount
type exchange is one (1). Use the connection cable
YR-806.
When more than 2 pieces are mounted, we suggest you
use rack-mount type exchange. For connection between
the exchange and the DT-E11, use the YR-802, and
the YR-803 for extension of the DT-E11 .
Such devices as indicator, control unit etc. can be
made by using this unit and 24V DC power supply.
Insert this unit into a slot intended for the PI unit No. 2
(Zone No. 8-15).
— 3 —
Summary of Contents for CP-63
Page 59: ...TOA ELECTRIC CO LTD KOBE JAPAN...
