Toa CP-62, Functions And Operating Instructions, Page: 17 / 92

EXES-6000, CP-62 Summary of Dial Operations (Type 3)
2-digit dialing and easy paging operation 60 stations (No.20 ~ 79), 70 stations (No. 10 ~ 79))
Classification
Call
Function
Press-to-talk
Remote response
Remote response registration
Continuous calling tone response
Privacy
Secretary transfer
Single digit registration
Single digit dialing
Personal number registration
In/Out annunciation-lamp ON
Personal number cancellation
In/Out annunciation-lamp OFF
Personal number call
Personal number paging
Conference
Call forwarding registration
Conference clear
Mic off
Priority/priority response
Executive priority
Call transfer
Number
X X : Station No.
1 XXX : 1000 ~ 1499
X X : Station No., Personal No.,
Single digit number
X X : Transfered Station No.
X X : Station No., Personal No.,
Single digit number
Description
Conversation is simplex when PTT bar is used.
When a station is called by continuous calling
tone, near station in the groups can respond the
call instead of the called station.
Group registration of stations can be made from
each station.
Called party touches one of these keys then
conversation may begin.
When a party does not wish to accept incom-
ming calls, set the Privacy Switch in the ON
position.
This function allows for automatic transfer of
calls to a secretary when desired.
This function allows for single digit registration
of up to 4 digits among the numbers 0 through
9 and the
key.
Registered dial code may be automatically
dialed.
Personal number may be resistered at any
master station which the person to whom the
number is assigned expects to be.
When anyone having a personal number leaves
the office he merely cancels the programming
of his personal number.
A personal number dialing enables the station
call or zone paging for a person having the
personal number.
A conference call may be made with up to 4
persons. Participants must be called individually.
This function allows for automatic transfer of
call to another station which number is
registrated already.
If a person called into a conference is absent,
the conference may be returned to the original
condition.
This function is used to temporarily hold a
conversation, causing a holding tone to sound
at both stations. The line is thus kept open
until the party who operates the mic off switch
re-dials and the call is continued.
When the called party is busy, this function
signals to request priority. The party requesting
can talk after the called party responds.
When the called party is busy, this function
allows interruption of the existing conversation
and immediate direct contact with the called
party.
The called party can transfer the call to a
selected other station (by station number,
personal number or single digit number).
Dial operation
—16—