CD/USB/SD
1
2
3
4
16
10
9
8
7
15 18 5
21
26
25
20
13
12
11
14
17
6
23
24
22
19
In CD mode, Press to change play mode cyclically as shown below.
3. NOMENCLATURE AND FUNCTIONS
[Front]
REPEAT TRACK
REPEAT FOLDER
PLAY ALL
REPEAT ALL
PLAY ALL RANDOM
REPEAT TRACK
PLAY ALL
REPEAT ALL
PLAY ALL RANDOM
1. Power switch : Press ON to switch on the power. Press OFF to switch off the power.
2. USB Connector : Insert the USB.
3. LCD Display : CD status including track number and playing time.
4. Disc Drive : Insert the disc.
5. SD/MMC CARD Connector : Accept SD Card or MMC Card.
6. CD/USB/SD : Press this key to change to CD, USB or SD mode.
7. PLAY/PAUSE : Press once to start playing, press again to pause.
8. STOP : Press this key to stop playing.
9. CUE : Press this key to next track number.
10. REV : Press this key to previous track number.
11. FOLDER
: Press to next folder. Available for USB and SD Card.
12. FOLDER
: Press to previous folder. Available for USB and SD Card.
13. REPEAT : In MP3 mode and in USB mode, Press to change play mode cyclically as shown below.
14. A-B : When this key is pressed during play, the beginning is marked. Press this key one more time, the
end is also marked, and the set will play from the beginning to the end cyclically. Press this key again to
reset the function.
15. EJECT : Press this key to remove the disc.
16. PROG : Set to programming mode. When the STOP key is pressed during programming mode, all
programs are cleared.
17. MUTE : In playing mode, press this key to mute, press again to recovery.
18. CD Indicator : Press once CD/TUNER on remote controller to CD mode. The LED will light up.
19. FM TUNER Display : FM Tuner status including FM band and channels memory.
20. UP : Every time the UP key is pressed, the reception frequency is increased by 50kHz or 100kHz for FM.
(Depending on sales area, it has been adjusted to one of two.) When this key is pressed over 1.5
seconds, the auto tuning starts and stop automatically as soon as station is detected.
21. DOWN : Every time the DOWN key is pressed, the reception frequency is decreased by 50kHz or 100kHz
for FM. (Depending on sales area, it has been adjusted to one of two.) When this key is pressed over 1.5
seconds, the auto tuning starts and stop automatically as soon as station is detected.
22. MEMORY : This key can save preset memory. The FM band has fixed preset memory of 30 CH. To save
the displayed reception frequency in the preset memory, press the MEMORY key, then press the number
key. Press the MEMORY key again to save the reception frequency in that number key.
23. 1~10 : Press these keys to select preset station 1~10.
24. +10/- - : Press this key once and the preset station number will add 10. Press this key for more than 1.5
seconds, then use number key to input the preset station.
25. TUNER Indicator : Press once CD/TUNER on remote controller to TUNER mode. The LED will light up.
26. IR : Pick up signal from the remote controller.
1
2
16
12
11
10
9
13
19
4
3
5
8
6
15
14
17
18
7
28
29
30
31
32
[Rear]
[Remote Handset]
90 80 70 60 50 40 30 20 10
OFF
28. ANTENNA terminals : Connect to FM antenna. (75 Ohms)
29. TUNER OUT stereo terminals : Provide stereo audio output of received radio program. (RCA jack)
30. PRIORITY OUT stereo terminals : Provide stereo audio output in the following priority : CD, USB, SD, FM.
(RCA Jack)
31. CD OUT stereo terminals : Provide stereo audio output of CD program. (RCA jack)
32. AC Inlet : Connect to AC cord 220 - 240V.
1. PLAY/PAUSE : See No.7 on player unit.
2. STOP : See No.8 on player unit.
3. PROG/MEM : In CD mode, See No.16 on player unit. In TUNER mode,
See No.22 on player unit.
4. ID3/ASM : In CD mode, When this key is pressed, the ID3 in the LCD
display will flash, and the ID3 TAG is displayed, pressing this key again to
cancel the ID3 function. In TUNER mode, This is Auto scan mode and
memory function. Press this key for more than 1.5 seconds, the tuner will
search the station and store in memory automatically.
5. ESP-MO/ST : In CD mode, ESP is displayed in the LCD when the key is
pressed, and the electronic anti-shock is activated. The electronic
anti-shock time is about 40 seconds. In TUNER mode, Press this key, to
change between stereo and mono mode.
6. DIRECT : In TUNER mode, This is a direct search function. Press this key once, then use number key to
input the station frequency, press DIRECT key again to confirm the frequency. The tuner jump to this
station. If the input frequency is beyond the range, the tuner will display ERR.
7. 0-9; 1-10 : In CD mode, Use this key to select the track you want directly. In TUNER mode, See No.23
on the player unit.
8. +10/- - : In TUNER mode, See No.24 on player unit.
9. FOLDER/M-UP : In CD mode, See No.11 on player unit. In TUNER mode, Press this key to select preset
memory in increment.
10. FOLDER/M-DOWN : In CD mode, See No.12 on player unit. In TUNER mode, Press this key to select
preset memory in decrement.
11. UP/CUE : In CD mode, See No.9 on player unit. In TUNER mode, See No.20 on player unit.
12. DOWN/REV : In CD mode, See No.10 on player unit. In TUNER mode, See No.21 on player unit.
13. REPEAT : In CD mode, See No.13 on player unit.
14. A-B : In CD mode, See No.14 on player unit.
15. SLEEP : In TUNER mode, When SLEEP key is pressed, the sleep function is set and the sleep time in
display will flash for 5 seconds. The sleep time begins from 90 minutes and changes cyclically as shown
below. When the SLEEP function is set, the power is automatically switched off after the sleep time.
The sleep function is cleared, if the SLEEP key is pressed till the sleep time is not displayed on the LCD.
16. CD/USB/SD : In CD mode, See No.6 on player unit.
17. EJECT : In CD mode, See No.15 on player unit.
18. MUTE : In CD mode, See No.17 on player unit.
19. CD/TUNER : Switch between CD and TUNER for remote control.
27. Removable Mounting Brackets : For mounted on an EIA equipment rack
27
27
