48
Remote controller
C-RM700
Camera control terminals
GND
Shielded twisted-pair cable
Combination camera
To video input
Sensor
1
4
6
9
5, 10
To video input
Sensor
1
4
6
9
5, 10
Using the each camera's alarm
input allows the sensors to be
connected for each individual
camera.
Note
Number of connectable sensors
differs depending on the type of
camera.
To 24 V AC
8.2. Connection to Multiple Combination Cameras
[Connected Camera Termination Switch Setting]
Make sure that the termination switches of the cameras connected to the system are set as follows.
Cameras other than the last connected camera: Termination switch OFF
Last connected camera: Termination switch ON
[Connection cables]
• Recommended cable type: CPEV-S type (shielded twisted-pair cable) thicker than 0.65 mm in diameter.
• The maximum cable distance between the unit and the Combination camera is 1.2 km when connected in a
matched pair. If multiple cameras are connected to a system, the maximum distance between connected
equipment is 1.2 km in total.
Remote Controller
C-RM700
Combination
camera
a
Combination
camera
b
Combination
camera
c
Termination switch:
OFF
Termination switch:
OFF
Termination switch:
ON
Remote Controller
C-RM700
Combination
camera
Combination
camera
Combination
camera
