Toa BS-P1030BIP1, User Manual

Page: 10 / 23

3-3
Chapter 3: wiring
3.2 Installation description
3.2.2 Speaker installation by bracket
[Required accessories]
The required parts are included in accessories.
Bracket ................................................................................. 1
Spacer (M5) ......................................................................... 2
Screw
（
M5*10
）
................................................................. 2
Step 1: installing all the attached
bracket, gaskets, and screws on the
speaker.
Step 2: selecting the suitable angle and
location to install the speaker on the
wall.
Note:
(1) the bracket is also applicable to
the level of installation. Loosen the
standard screws, speaker can be
rotated 180 degrees, adjusted to the
proper position, and then tighten the
standard screw, make the speaker
achieves the best effect of broadcast.
(2) For outdoor installation, refer to
the picture on the right. The angle
between the speaker and the
installation surface should be less
than or equal to 160 degrees.
(3) When the angle of the speaker
and trademark is different, please
pull up it gently and turning it to the
appropriate location.
Note: the screws are not included in the package, please preparing related screws refer to the
size of the installation holes.