9
5. CONNeCTION eXAMPLeS
Bluetooth
®
LCD
AM – CF1
HDMI
USB
LAN
USB
PC
Webcam
Polycom
Control In/Out
3rd party
controls
Video
Conference
System
AUX IN
AUX OUT
Codec In/Out
PoE Extender
(DC 52V)
AC Adapter
(DC 12V)
Mixer/
Amplifier
Sound
Source
Device
6. INSTALLATION
Follow the procedures below to mount the AM-CF1 unit to a wall:
Be sure to use the following wall mounting brackets and screws. If
hardware other than that mentioned below is used, the unit could fall
down, potentially resulting in damage and personal injury.
WARNINg
Step 1. Remove the 4 screws fixing the wall mounting bracket as illustrated below and detach the bracket from
the AM-CF1 unit.
Step 2. Attach the wall mounting bracket to a wall.
Separately prepare anchor bolts and other hardware needed for
wall mounting.
A
6
Step 3. Hook the unit’s lower mounting tab (A in the figure at right)
into the mounting bracket mounted on the wall.
Step 4. Make necessary connections.
For connection method, see p. 9.
Step 5. Bind connected wires using a tying tool or the like.
Step 6. After connection is completed, tilt the unit upward with the
tab hooked in Step 3 as a supporting point.
Step 7. If the upper tab (B in the figure at right) contacts the bracket on the
wall, shift the unit slightly upward and hook the upper tab to the
bracket on the wall.
Step 8. Secure the unit to the bracket using the screws removed in Step 1.
Note
Screws can be installed not only from the upward direction, but
also from the side or downward direction.
7. CONNeCTIONS
7.1. AC Adapter Connection
Connect the AC adapter*
1
to the AM-CF1’s power input terminal.
*
1
Use the AC adapter with the following specification.
AC adapter
For AC adapters, use the adapter with the
designated specification.
The use of other adapters could result in fire or
other possible damage.
CAUTION
[Usable AC adapter]
Output : 12 V DC, 5 A, positive tip polarity
7.2. Network Connection
The AM-CF1 automatically distinguishes between 10BASE-T and 100BASE-TX networks and establishes a
connection. For this connection, use a straight UTP Category 5 or greater LAN (Ethernet) cable terminated with
an RJ-45 connector.
B
From PoE Extender
