manualshive.com logo in svg

Toa A-9060DH, Installation And Operating Instructions Manual

Share
Download
Toa A-9060DH Installation And Operating Instructions Manual Download Page 112

112

20.7. Monitoring the Unit's Operation Status

The operation status of the unit can be monitored in real time.

Step 1.

Double-click the "MaintCtrl.exe" icon to run the 9000 series
maintenance software.
The screen at right is displayed.

Step 2.

Click the "Others" button.
The window at right opens.

Tip

You can also set the communication port
and speed here when pressing the
"Option" button on the menu bar to
select "Communication Setting."

Step 3.

Click the "Start" button.
Operation status such as the
unit's key or knob actions is
displayed in real time.

[Screen indications and their descriptions]

3

Indication

Description

KEY INPUT SELECT 1

INPUT SELECT 1 key has been pressed.

KEY POWER long

Power switch has been pressed long.

KEY UTILITY & ESC/BACK

UTILITY key and ESC/BACK key have been pressed at the
same time.

ROTARY INPUT VOLUME L 1

INPUT VOLUME control has been turned one click
counterclockwise.

CIN CONTROL INPUT 2 (ON)

Control input 2 terminal has been turned on.

MATRIX MODE

Unit is operating in matrix mode.

MIXER MODE

Unit is operating in mixer mode.

POWER ON

Power has been turned on.

2

Summary of Contents for A-9060DH









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands